The Best Way to Join Artificial Grass
If you’re considering installing artificial grass in your outdoor space, one of the most crucial steps is joining the turf pieces together. Properly joining artificial grass ensures a high-quality, long-lasting finish that will enhance the overall appearance of your lawn.
In this guide, we’ll walk you through the best techniques for joining artificial grass, including the use of jointing tape, glue, and nails. Whether you’re a DIY enthusiast or a professional, this guide will equip you with the knowledge and tools needed to achieve seamless and durable joins for your artificial grass installation.
Understanding the Importance of Proper Seaming
Before we dive into the specific techniques for joining artificial grass, let’s discuss why proper seaming is crucial. Seams are areas where two pieces of artificial turf are joined together. When not done correctly, seams can result in visible lines or ridges on the surface of the grass, which can detract from its natural appearance. By following the best practices for seaming, you can achieve invisible joins that seamlessly blend the turf pieces together, creating a unified and flawless lawn.
Preparing the Turf for Seaming
Before you begin the seaming process, it’s essential to properly prepare the turf pieces. Start by unrolling the two pieces of artificial grass next to each other, ensuring that they are running adjacent to one another. This step allows you to assess the alignment and make any necessary adjustments before proceeding to join two pieces of grass.
Applying Jointing Tape
Once the edges are trimmed, it’s time to apply the artificial grass jointing tape. Jointing tape acts as a reinforcement for the seam and helps to create a strong bond between the turf pieces. Unroll the joining tape, ensuring the shiny side is facing down along the entire length of the joint, ensuring it is positioned centrally between the trimmed edges. To secure the tape, you can use either nails or adhesive, depending on your preference and the specific requirements of your installation.
Folding and Securing the Turf
After applying the jointing tape, carefully place one side of the turf onto the tape, ensuring a gap of 2-3mm between the sections for optimal results. Slowly place the artificial grass on the other side of the join, aligning it with the first section. This step requires precision and attention to detail to achieve a seamless and invisible join. Once the turf pieces are in place, you can use weighted planks to keep them firmly secured and allow the adhesive to dry.
Are you looking to buy artificial grass for your garden? Click the button below to view our full range!
Choosing the Right Joining Method
When it comes to joining artificial grass, you can also use glue or nails. Both methods have their advantages and considerations, and the choice ultimately depends on your specific installation requirements and personal preference.
Using Glue for Artificial Grass Seaming
Joining adhesive is commonly used in artificial grass installations to create strong and durable joins. To apply the joining adhesive, you’ll need a mastic gun.
Apply a bead of glue under the edge of the first section of grass, followed by a second bead to the front edge to accommodate the second piece of grass. Take care to avoid excess glue, as it can spill onto the turf and compromise the final appearance of the joining edge.
Using Nails for Artificial Grass Joints
Alternatively, you can opt to secure the turf pieces together using artificial grass fixing pins. This method is suitable for installations with low to medium levels of foot traffic. To secure the seam with nails, place them on both sides of the joint in a staggered formation, ensuring they are approximately 4-6 inches apart.
Nailing provides additional strength and stability to the joint, ensuring it remains intact over time.
To view our full range o installation accessories, click the button below.
Allowing Time to Dry and Set
Once you’ve completed the seaming process, it’s crucial to allow sufficient time for the adhesive or glue to dry and set. This typically takes around 2-3 hours, but it’s advisable to follow the manufacturer’s instructions for the specific product you’re using. To ensure a perfect seam, it’s recommended to lay weighted planks along the join during the drying process
Joining artificial grass is a critical step in achieving a flawless and professional-looking lawn. By following the steps outlined in this guide, including preparing the turf, applying jointing tape, choosing the right joining method, and allowing sufficient drying time, you can create seamless and durable joins that enhance the overall appearance and longevity of your artificial grass installation.
Remember, proper seaming is not only about aesthetics but also about functionality. Well-executed joins ensure that your artificial lawn remains intact and performs optimally, with no visible ridges or lines.
At Nomow, we’re dedicated to providing high-quality artificial grass and expert advice to help you achieve outstanding results. If you have any questions or need further guidance on joining artificial grass, our knowledgeable team is here to assist you.
